Cart summary

You have no items in your shopping cart.

RanBP1 Rabbit Polyclonal Antibody

SKU: orb19210

Description

RanBP1 Rabbit Polyclonal Antibody

Research Area

Cell Biology, Epigenetics & Chromatin, Molecular Biology, Protein Biochemistry, Signal Transduction

Images & Validation

Tested ApplicationsFC, ICC, IF, IHC, WB
Dilution RangeWestern blot, 0.1-0.5μg/ml, Human, Mouse, Rat Immunohistochemistry (Paraffin-embedded Section), 0.5-1μg/ml, Human, Mouse, Rat Immunocytochemistry/Immunofluorescence, 2μg/ml, Human Flow Cytometry (Fixed), 1-3μg/1x10^6 cells, Human
ReactivityHuman, Mouse, Rat

Related Conjugates & Formulations

Key Properties

Antibody TypePrimary Antibody
HostRabbit
ClonalityPolyclonal
IsotypeRabbit IgG
ImmunogenE.coli-derived human RanBP1 recombinant protein (Position: A2-Q201). Human RanBP1 shares 93.1% amino acid (aa) sequence identity with mouse RanBP1.
TargetRan-specific GTPase-activating protein
Molecular Weight27 kDa
PurificationImmunogen affinity purified.
ConjugationUnconjugated

Storage & Handling

StorageMaintain refrigerated at 2-8°C for up to 2 weeks. For long term storage store at -20°C in small aliquots to prevent freeze-thaw cycles.
Form/AppearanceLyophilized
Buffer/PreservativesEach vial contains antibody formulated with stabilizing components, 0.9 mg NaCl, 0.2 mg Na2HPO4, and 0.05 mg NaN3. *This antibody is supplied in a stabilized formulation. Compatibility with conjugation reactions depends on the chemistry of the conjugation method used. For conjugation methods that are not compatible with the stabilizing components present in this formulation, a carrier-free antibody format is required.
ConcentrationAdding 0.2 ml of distilled water will yield a concentration of 500 μg/ml.
Expiration Date12 months from date of receipt.
DisclaimerFor research use only

Alternative Names

Ran-specific GTPase-activating protein; Ran-binding protein 1; RanBP1; RANBP1

Similar Products

  • ADRM1/ARM-1/ARM Rabbit Polyclonal Antibody [orb865352]

    ELISA,  FC,  ICC,  IF,  IHC,  WB

    Human, Mouse, Rat

    Rabbit

    Polyclonal

    Unconjugated

    100 μg
  • RAN binding protein 1 Antibody [orb556079]

    ICC,  WB

    Human, Mouse

    Rabbit

    Polyclonal

    Unconjugated

    100 μl
  • SOX18 Rabbit Polyclonal Antibody [orb738467]

    ELISA,  FC,  ICC,  IF,  WB

    Human, Monkey, Mouse, Rat

    Rabbit

    Polyclonal

    Unconjugated

    100 μg
  • RANBP1 Rabbit Polyclonal Antibody [orb330464]

    WB

    Bovine, Equine, Yeast

    Human

    Rabbit

    Polyclonal

    Unconjugated

    100 μl
  • RanBP1 Rabbit Polyclonal Antibody [orb1670]

    IF,  IHC-Fr,  IHC-P

    Bovine, Canine, Equine, Gallus, Porcine, Rabbit, Rat

    Human, Mouse

    Rabbit

    Polyclonal

    Unconjugated

    50 μl, 100 μl, 200 μl
Quality Guarantee

Quality Guarantee

Explore bioreagents carefree to elevate your research. All our products are rigorously tested for performance. If a product does not perform as described on its datasheet, our scientific support team will provide expert troubleshooting, a prompt replacement, or a refund. For full details, please see our Terms & Conditions and Buying Guide. Contact us at support@biorbyt.com.

RanBP1 Rabbit Polyclonal Antibody

Flow Cytometry analysis of U937 cells using anti-RanBP1 antibody. Overlay histogram showing U937 cells (Blue line). To facilitate intracellular staining, cells were fixed with 4% paraformaldehyde and permeabilized with permeabilization buffer. The cells were blocked with 10% normal goat serum. And then incubated with rabbit anti-RanBP1 Antibody (1 µg/1x10^6 cells) for 30 min at 20°C. DyLight®488 conjugated goat anti-rabbit IgG (5-10 µg/1x10^6 cells) was used as secondary antibody for 30 minutes at 20°C. Isotype control antibody (Green line) was rabbit IgG (1 µg/1x10^6) used under the same conditions. Unlabelled sample without incubation with primary antibody and secondary antibody (Red line) was used as a blank control.

RanBP1 Rabbit Polyclonal Antibody

IF analysis of RanBP1 using anti-RanBP1 antibody. RanBP1 was detected in immunocytochemical section of A431 cells. Enzyme antigen retrieval was performed using IHC enzyme antigen retrieval reagent for 15 mins. The cells were blocked with 10% goat serum. And then incubated with 2 µg/mL rabbit anti-RanBP1 Antibody overnight at 4°C. DyLight®488 Conjugated Goat Anti-Rabbit IgG was used as secondary antibody at 1:100 dilution and incubated for 30 minutes at 37°C. The section was counterstained with DAPI. Visualize using a fluorescence microscope and filter sets appropriate for the label used.

RanBP1 Rabbit Polyclonal Antibody

IHC analysis of RanBP1 using anti-RanBP1 antibody. RanBP1 was detected in paraffin-embedded section of human intestinal cancer tissues. Heat mediated antigen retrieval was performed in citrate buffer (pH6, epitope retrieval solution) for 20 mins. The tissue section was blocked with 10% goat serum. The tissue section was then incubated with 1 µg/ml rabbit anti-RanBP1 Antibody overnight at 4°C. Biotinylated goat anti-rabbit IgG was used as secondary antibody and incubated for 30 minutes at 37°C. The tissue section was developed using Strepavidin-Biotin-Complex (SABC) with DAB as the chromogen.

RanBP1 Rabbit Polyclonal Antibody

IHC analysis of RanBP1 using anti-RanBP1 antibody. RanBP1 was detected in paraffin-embedded section of human lung cancer tissues. Heat mediated antigen retrieval was performed in citrate buffer (pH6, epitope retrieval solution) for 20 mins. The tissue section was blocked with 10% goat serum. The tissue section was then incubated with 1 µg/ml rabbit anti-RanBP1 Antibody overnight at 4°C. Biotinylated goat anti-rabbit IgG was used as secondary antibody and incubated for 30 minutes at 37°C. The tissue section was developed using Strepavidin-Biotin-Complex (SABC) with DAB as the chromogen.

RanBP1 Rabbit Polyclonal Antibody

IHC analysis of RanBP1 using anti-RanBP1 antibody. RanBP1 was detected in paraffin-embedded section of mouse intestine tissues. Heat mediated antigen retrieval was performed in citrate buffer (pH6, epitope retrieval solution) for 20 mins. The tissue section was blocked with 10% goat serum. The tissue section was then incubated with 1 µg/ml rabbit anti-RanBP1 Antibody overnight at 4°C. Biotinylated goat anti-rabbit IgG was used as secondary antibody and incubated for 30 minutes at 37°C. The tissue section was developed using Strepavidin-Biotin-Complex (SABC) with DAB as the chromogen.

RanBP1 Rabbit Polyclonal Antibody

IHC analysis of RanBP1 using anti-RanBP1 antibody. RanBP1 was detected in paraffin-embedded section of rat intestine tissues. Heat mediated antigen retrieval was performed in citrate buffer (pH6, epitope retrieval solution) for 20 mins. The tissue section was blocked with 10% goat serum. The tissue section was then incubated with 1 µg/ml rabbit anti-RanBP1 Antibody overnight at 4°C. Biotinylated goat anti-rabbit IgG was used as secondary antibody and incubated for 30 minutes at 37°C. The tissue section was developed using Strepavidin-Biotin-Complex (SABC) with DAB as the chromogen.

RanBP1 Rabbit Polyclonal Antibody

Western blot analysis of RanBP1 using anti-RanBP1 antibody. Electrophoresis was performed on a 5-20% SDS-PAGE gel at 70V (Stacking gel) / 90V (Resolving gel) for 2-3 hours. The sample well of each lane was loaded with 50 ug of sample under reducing conditions. Lane 1: human K562 whole cell lysates, Lane 2: human HEK293 whole cell lysates, Lane 3: human HL-60 whole cell lysates, Lane 4: human U20S whole cell lysates, Lane 5: human A431 whole cell lysates, Lane 6: human HEPG2 whole cell lysates, Lane 7: human U937 whole cell lysates, Lane 8: rat testis tissue lysates, Lane 9: rat C6 whole cell lysates, Lane 10: mouse testis tissue lysates. After Electrophoresis, proteins were transferred to a Nitrocellulose membrane at 150mA for 50-90 minutes. Blocked the membrane with 5% Non-fat Milk/ TBS for 1.5 hour at RT. The membrane was incubated with rabbit anti-RanBP1 antigen affinity purified polyclonal antibody at 0.5 µg/mL overnight at 4°C, then washed with TBS-0.1% Tween 3 times with 5 minutes each and probed with a goat anti-rabbit IgG-HRP secondary antibody at a dilution of 1:5000 for 1.5 hour at RT. The signal is developed using an Enhanced Chemiluminescent detection (ECL) kit with Tanon 5200 system. A specific band was detected for RanBP1 at approximately 27KD. The expected band size for RanBP1 is at 23KD.

UniProt Details

No UniProt data available

Documents Download

Datasheet
Product Information
Download

Request a Document

Protocol Information

WB
Western Blot (IB, immunoblot)
View Protocol
IHC
Immunohistochemistry
View Protocol
FC
Flow Cytometry
View Protocol
IF
Immunofluorescence
View Protocol
ICC
Immunocytochemistry
View Protocol

RanBP1 Rabbit Polyclonal Antibody (orb19210)

  • Star
  • Star
  • Star
  • Star
  • Star
  • 0.0
Based on 0 reviews

Participating in our Biorbyt product reviews program enables you to support fellow scientists by sharing your firsthand experience with our products.

Login to Submit a Review

No reviews yet

Available Sizes

Select a size below

100 μg
$ 450.00
DispatchUsually dispatched within 2-4 weeks
Bulk Enquiry